Shed Security - Slide-In Door Garage Security Bar for Office, Shed, Beach Hut
Slide-In Door Security Bar
For Office, Beach Hut, Shed Doors
These Slide-In bars have been designed by us to compliment our range of original Drop-In bars
THE BAR FITS ACROSS THE DOOR OPENING TO GREATLY INCREASE THE SECURITY
Benefits of slide-in version
Can be fitted with lock on left or right
Only one padlock required per bar
Expands with surface (e.g. expanding/contracting wood in summer/winter)
Quicker fitting and removal process
Options for raising off and shrouding to protect padlock - (Please contact us for these options)
The bar is made from 40x40mm steel square box section and the locating brackets are 50mm x 50mm steel box section with 50mm x 3mm flat plate. The padlock facility is provided by welded steel tabs which creates a strong locking method.
Brackets will be supplied pre-drilled for easy DIY fitting
Bracket size 170mm x 50mm x 53mm Hole size 13mm
Above you can see that when the bar is in place the padlocked end is flush with the bracket and the other end sticks out approx. 50mm. This is done for strength when engaged and so that when fitted to a wooden door/structure it will be able to expand and contract with the wood.
Painting All parts will be supplied painted in primer
Fixing These can be fitted to timber or brick with appropriate fixing (Anti-Theft for brick or Coach Bolts (150mm long) for Wood.
Backing plates are recommended for wood fixing to add strength.
PLEASE NOTE If you order a length of 1000mm (1m) between the fixing hole centres on the brackets we will build it so that the hole fixing points will be at 1000mm (1m) but the length of the slide-in bar end to end will be 1100mm this is for the extra that is needed to protrude out of the end.
How to use the bar
YOU WILL NEED APPROX 150mm SPACE AT EITHER SIDE FOR SLIDING IN AND OUT OF THE BAR
SLIDE THE BAR ACROSS OUT OF THE PADLOCKED BRACKET
YOU CAN SEE ON THE PICTURES THAT AT THE NON-PADLOCKED END HOW THE BAR STICKS OUT FURTHER WHERE YOU WILL NEED APPROX AN EXTRA 50mm OF ROOM FOR THIS TO HAPPEN
WHEN THE BAR HAS BEEN SLID ACROSS YOU CAN THE LIFT THE PADLOCKED END UP ENOUGH TO CLEAR THE BRACKET
FINALLY SLIDE THE BAR OUT
FITTING IS REVERSAL OF REMOVAL
Included Slide-In Bar to length chosen (if you need a custom length please let us know) Locating bracket End caps
POSITION ONE BRACKET WHERE REQUIRED AND MARK HOLE POINTS
DRILL THROUGH WOOD AND SECURE WITH BOLTS THROUGH BRACKET INTO WOOD/BRICK